ALIMINIUM PULLEY 22 MM DIAMETER IN METAL BRACKET WITH MOUNTING PLATE.

Prod ID : PB-4107

TESTED TO 680 KGS ,FOR SAFE WORKING LOAD OF 225 KG ,TWO FOUR BLOCK LUBRICATION WHEELS ,SAFETY HOOKS AT TOP AND BOTTOM AND AUTOGRIP DEVICE.

Prod ID : PM-4108

TO PROVIDE A SIMPLE 'SEE-SAW' FOR EXPERIMENTS ON BALANCING MASSES ,LEADING TO THE PRINCIPLE OF THE LEVER. COMPRISES FIVE WOOD BEAMS APPROXIMATELY 610 X 44 MM GRADUATED AT 38 MM INTERVALS, FOUR
U-SHAPED SUPPORTS , GROOVED TO LOCATE FULCRUM PINS , 40 BRASS PENNY-WEIGHTS 25 X 25 X 2 MM AND 20 FULCRUM PINS.

Prod ID : LK-4109

ONE METER LONG RULE ,ONE SIDE DIVIDED IN CENTIMETERS AND MILLIMETERS AND OTHER SIDE IN INCHES AND TENTHS . DRILLED EVERY 100 MM WITH
S-HOOKS.

Prod ID : HS-4110

FOR ATTACHING TO CORDS FOR LIFTING OF VARIOUS ITEMS.

Prod ID : PMSH-41101

COMPRISES TWO GROOVED HARD WOOD WHEELS 150 X 75 MM DIAMETER RESPECTIVELY WITH METAL MOUNTING PIN.

Prod ID : SWA-4111

WITH ALUMINIUM ALLOY BLOCK COMPRISING WHEEL ,100 MM DIAMETER AND AXLES 50 MM AND 25 MM DIAMETER,MOUNTED ON ADJUSTABLE STEEL CONES IN STEEL FRAME,MOUNTED ON WOODEN BOARD WITH FOUR HOLES FOR WALL MOUNTING,COMPLETE WITH 5 METERS NYLON CORD AND STEEL HOOK .

Prod ID : CWA-4112

APPROXIMATELY 200 MM DIA BY 44 MM WIDE WHEEL, MOUNTED ON A BALANCED HORIZONTAL SHAFT IN METAL BRACKET ,WITH FOUR HOLES FOR WALL MOUNTING.

Prod ID : MFW-4113

TRIANGULAR SECTION ALLOY TRACK,LENGTH 255 CM ,WITH STAGGERED AIR HOLES .SUPPORTED ON TWO LIGHT ALLOY CASTINGS POSITIONED 45 CM FROM EACH END OF THE TRACK.ONE SUPPORT HAS A TWO POINT CONTACT AND OTHER A ONE POINT CONTACT FOR LATERAL AND HORIZONTAL ADJUSTMENTS FOR WHICH A KNURLED SCREW IS PROVIDED .LARGE CATAPULT ARMS WITH SLOTS FOR ELASTIC BANDS ARE FITTED TO EACH END OF THE TRACK.A PULLEY FITTED TO ONE END OF THE TRACK ENABLES EXPERIMENTS INVOLVING ACCELERATION UNDER A CONSTANT FORCE TO BE INVESTIGATED.IDENTICAL END CAPS ENABLE AIR TO BE INTRODUCED FROM EITHER END OF THE TRACK,BUNG BEING SUPPLIED TO CLOSE THE END NOT BEING USED. THE VEHICLES BUFFER ATTACHMENTS AND CLAMPING SCREWS ARE MATT BLACK TO HELP INTERPRETATION OF STROBOSCOPIC PHOTOGRAPHS.

: ACCESSORIES :
CENTI SECONDS TIMER
PHOTOTIMING GATE
XENON STROBOSCOPE
HAND HELD STROBOSCOPE
ACCESSORIES KIT
AIR BLOWER
SMALL VEHICLE
LARGE VEHICLE

Prod ID : LAT-4114

SUPPLIED COMPLETE WITH , 2 LARGE VEHICLES
( MASS 400 GM, LENGTH 215 MM )

1 SMALL VEHICLE ( MASS 200 GM , LENGTH 100 MM )
2 MAGNETIC BUFFERS ( 25 MM DIA )
2 PLASTICINE HOLDERS ( 20 MM DIA ) WITH CENTRAL HOLE.
4 CATAPULTS ( 45 MM WIDE ) WITH SLOT FOR ELASTIC BAND.
3 STEEL BUFFERS WITH CENTRAL HOLE.
4 ELASTIC CORDS ( 220 MM LONG ) WITH PLASTIC RINGS.
1 REEL OF NYLON THREAD .
2 WHITE PLASTIC RODS ( 4 MM DIA 150 MM LONG ) FOR STROBOSCOPIC PHOTOGRAPHY
24 NEEDLES FOR USE WITH STEEL BUFFER .
20 WHITE PLAIN CARDS FOR INTERRUPTING LIGHT BEAMS.
1 REEL RUBBER STRAND
1 PACK OF PLASTICINE
20 ELASTIC BANDS

THE KIT ENABLES THE AIR TRACK TO BE USED TO ITS FULL POTENTIAL, PROVIDING MOST OF THE NECESSARY EQUIPMENT TO PERFORM THE EXPERIMENTS DETAILED IN THE COMPREHENSIVE INSTRUCTION MANUAL

Prod ID : LATA-4115

SUITABLE FOR USE WITH LINEAR AIR TRACK ,WITH A FLEXIBLE HOSE TERMINATING IN A TAPERED ADAPTOR.
POWER SUPPLY 230 V, AC 50HZ.

Prod ID : AB-4116

A VERY CONVIENT AIR PUMP USED IN LABORATORY FOR VARIOUS APPLICATIONS.

Prod ID : PMFP-41162

A HIGH QUALITY STROBOSCOPE TO COVER THE REQUIREMENTS OF VARIOUS LEVELS OF STUDY , FEATURES HIGH ACCURACY WITH MANUAL AND DIGITAL READOUTS.SPECIALLY DESIGNED , COMPACT & ENCHASED IN PLASTIC CASE.

TECHNICAL SPECIFICATIONS :

Prod ID : SMD-3715

USED WHEREVER MOTION SEQUENCES HAVE TO BE ANALYSED OR ROTATION SPEEDS HAVE TO BE MEASURED .SEPARATE CONTROL UNIT AND HAND HELD LAMP.SUITABLE FOR CONTINIOUS OPERATION.BRIGHT LIGHT INTENSITY MAKES MEASURING POSSIBLE ALSO BY DAY LIGHT,VOLTAGE & FREQUENCY OUT PUT, EXTERNAL TIGGERING VIA PHOTO EMITTER INDUCTIVE SENSOR OR EXTERNAL TIGGERING SIGNAL FOR OBSERVATION OF IRREGULAR MOTION SEQUENCES , MEASURING OF ROTATION SPEED , FREQUENCY AND PERIOD LENGTH DIRECT READING IN THE REQUIRED UNIT,NO CONVERSATION NECESSARY.
TECHNICAL SPECIFICATIONS :

Prod ID : SDH-3716

MATT BLACK FINISH,250MM DIA,WITH 12 RADIAL SLOTS EXTENDING TO ITS EDGE AND FINGER HOLE . ROTATES ON HANDLE.

Prod ID: SH-3717

USED AS A LIGHT OPERATED TIMING GATE ,IT CONSISTS OF A PHOTO DETECTOR AND LIGHT SOURCE ( 2.5 V , 0.2 A BULB ) HOUSED IN TWO PLASTIC CASES HELD 40 MM A PART ON A METAL ROD ,4 MM SOCKET ARE PROVIDED FOR CONNECTING IT TO THE ELECTRONIC TIMER.
POWER SUPPLY :- 2 V/ AC.

Prod ID: PTG-4120

A PAIR OF IDENTICAL WOODEN TROLLEYS ( 300 MM LONG ) MOUNTED ON THREE WHEELS. A SPRING LOADED ROD IS FITTED TO GIVE IMPULSE WHEN RELEASED. IT HAS A PROVISION FOR STACKING THE TROLLEYS ON TOP OF EACH OTHER WITH REMOVABLE PINS.COMPLETE WITH 3 ELASTIC CORDS , 3 SPRINGS , 8 PINS ( FOR STACKING ), 2 RUBBER CORKS , 2 NEEDLES & 1 RELEASING PIN.A WOODEN TRACK 2 METER LONG COLLAPSABLE .THE TRACK PROVIDES AN EASILY INCLINABLE SMOOTH SURFACE .

Prod ID : DT-4121

OPERATES ON 12V AC .THE TIMER EMPLOYS ELECTROMAGNET WITH SPRING LOADED ARMATURE WHICH VIBRATES ABOVE A SUPPORT TABLE FOR A CARBON PAPER DISC, PAPER TAPE,DRAWN THROUGH GUIDES ON THE TABLE ,IS STRUCK BY A DOTTING SCREW CARRIED ON THE ARMATURE .THE PEG ON THE SUPPORT TABLE IS MOVABLE TO ALLOW MAXIMUM USE OF CARBON PAPER DISC. SUPPLIED WITH 90 METER ROLL OF TAPE AND CARBON PAPER DISCS. THE TICKER TAPE TIMER PRODUCES DOTS SPACED AT 1/50 OR 1/60 SEC INTERVALS DEPENDING ON MAIN FREQUENCY .ADDITIONAL BONUS WITH EXTRA GUIDES
ACCOMODATES 4.5 MM EXTERNAL DIAMETER RUBBER TUBING FOR THE
' PEARLS IN AIR ' WATER DROP EXPERIMENT.
POWER SUPPLY 12 V/ AC .

Prod ID : TTT-A-4122

THE DOTS ARE SPACED AT 1/50 SEC .POWER SUPPLY 12V / D.C. SPARES : TICKER TAPE ,WIDTH 9.5 MM IN ROLLS , 300 M LONG
CARBON DISCS , PACK OF 100 .

Prod ID : TTT-D-4123